Description:

Tangara-E is a fast little plane; it is the first prototype of Tangara Dynamics. Inspired by the bird Tangara Esmeralda or Tangara florida, the plane was designed to offer a fast-paced flying experience. Quick reactions and advanced skills are recommended for pilots interested in this model.  

Specifications:

Wing span: 58 cm  |   Lenght: 44 cm

Plain weight: 150 g  |  Take off weight:  350 g

3D Printing:

Filament: PLA or PLA+  |  Nozzle: 0.4mm  |   Min. Printing area: 20x20x25

This model has not been tested with LW-PLA.

Requirements: Electronics

This plane was designed with the FliteTest Power Pack A Radial V.2. This pack includes almost all the required electronic parts, except for the battery or receiver/transmitter. The power pack can be purchased from the following external link : FT Power Pack A

• Motor: Radial 1806 2280kv (included in FT Power Pack A)

• ESC: 25a with XT-30 Connector (included in FT Power Pack A)

• Servos: 5 gram servos (3 units) (included in FT Power Pack A)

• Battery: Tattu 850mah 75c 3S1P Lipo with XT30 or equivalent. 

• Receiver: Tested with FS-iA10B receiver, the smaller the better. 

Download STL Files and Guide on Thingiverse:

Videos