Designed by Eduardo Ramírez
Embedded Files
Description:
The Goli is a twin-engine, 3D-printed UAV RC plane designed for both line-of-sight and FPV (First-Person View) flying. Optimized for INAV flight systems, it delivers precise control and exceptional stability, even at speeds of up to 110 km/h. Inspired by the elegant Tangara goliplateada bird, Goli combines aerodynamic efficiency with smooth performance, making it an accessible yet advanced platform for RC and FPV enthusiasts alike.
Specifications:
Wing span: 840 mm | Lenght: 890 mm
Plain weight: ~520 g (PLA filament ) | Take off weight: 1200g
Wing airfoil: NACA SD7037 | Tail airfoil: NACA 0008
Available Now!
3D Printing:
It’s possible to print this plane using any of the following filaments: PLA, PLA Tough+, LW-PLA, ASA, or ASA Aero.
Nozzle: 0.4mm | Min. Printing area: 20x20x25
Requirements: Electronics
This plane is designed for use with INAV systems. Here are some recommended parts:
Motors: iFlight XING2 1806 2500KV Motor - 1.5mm Shaft or equivalent.
ESC: DYS XSC-20A BLHeli_S ESC or equivalent.
Servos: 12 gram servos (3 units)
Flight Controller: MATEKSYS F405-WMN or equivalent.
Video Transmitter (VTX): Walksnail or equivalent
GPS: HGLRC M100 Mini GPS or equivalent, should be small.
Battery: 4S (1500 mAh) or equivalent.
Receiver: TBS Crossfire Nano Rx Pro or equivalent.
Requirements: Other parts
Propeller: iFlight Nazgul 5030 Tri-Blade Propeller or equivalent.
Push rods: 1.2 mm (3 units)
Carbon fiber tube: 12 mm × 425 mm (1 unit)
Carbon fiber tube: 6 mm × 720 mm (1 unit)
Carbon fiber tube: 4 mm × 720 mm (1 unit)
Carbon fiber tube: 2 mm × 240 mm (1 unit)
Push rod connectors (3 units)
Rubber band (1 unit)
Glue: Tested with UHU Hart, please use equivalent like Cyanoacrylate Glue.
Duct tape
Page updated
Google Sites
Report abuse